Skip to Content

Roadway Design Division

PIPE CULVERTS AND ENDWALLS

Culverts and Flumes

Protected Endwalls

Safety Cross Drain Endwalls

Safety Side Drain Endwalls

 

STANDARD DRAWINGS HOME PAGE

 

PIPE CULVERTS AND FLUMES

DRAWING

REVISION DATE

DESCRIPTION

FLUME DETAILS
01/02/2013
STANDARD DETAILS FOR CONCRETE PIPE INSTALLATION
01/29/2014
STANDARD DETAILS FOR FLEXIBLE PIPE INSTALLATION
INDUCED TRENCH SOIL EMBANKMENT FOR PIPE CULVERT INSTALLATION
4/15/1997
FERROUS AND ALUMINUM CORRUGATED METAL PIPE
7/29/1994
FERROUS AND ALUMINUM CORR. METAL PIPE-ARCHES
5/27/2001
STANDARD OVAL & FLAT BASE CONCRETE CULVERT PIPE
3/15/1976
STRUTTING DETAILS FOR CORR. METAL & STRUCTURAL PLATE ROUND PIPE

 

SAFETY CROSS DRAIN ENDWALLS

DRAWING

REVISION DATE

DESCRIPTION

6/14/2013
15" CONCRETE ENDWALL CROSS DRAIN
 
15" CONCRETE ENDWALL CROSS DRAIN
6/14/2013
18" CONCRETE ENDWALL CROSS DRAIN
 
18" CONCRETE ENDWALL CROSS DRAIN
6/14/2013
24" CONCRETE ENDWALL CROSS DRAIN
 
24" CONCRETE ENDWALL CROSS DRAIN
6/14/2013
30" CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE
 
30" CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE
6/14/2013
36" CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE
 
36" CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE
6/14/2013
42" CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE
 
42" CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE
6/14/2013
48" CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE
 
48" CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE
11/01/2013
PIPE GRATE & SKEWED CONNECTION DETAILS FOR "U" ENDWALLS

 

SAFETY SIDE DRAIN ENDWALLS

DRAWING

REVISION DATE

DESCRIPTION

6/14/2013
SIDE DRAIN CONCRETE ENDWALL WITH STEEL PIPE GRATE
6/14/2013
CONCRETE ENDWALL TYPE "SD" WITH STEEL PIPE GRATE    (FOR 15" AND 18" PIPES) - (12:1 SLOPE)

 

PROTECTED ENDWALLS*

DRAWING

REVISION DATE

DESCRIPTION

2/12/1976
TYPE "A" CONCRETE ENDWALL 2:1 SLOPE, 36" TO 78"
1/15/2013
STRAIGHT CONCRETE ENDWALL
5/27/2001
STANDARD WINGWALLS HORIZONTAL OVAL CONCRETE PIPES
5/27/2001
STANDARD STRAIGHT ENDWALLS FLATBASE CONCRETE PIPES
5/27/2001
STANDARD WINGWALLS FLATBASE CONCRETE PIPES
1/19/1997
DETAIL OF STANDARD PIPE AND PIPE-ARCH CULVERT WITH BEVELED ENDS AND RIP-RAP
4/25/1990
CONCRETE ENDWALLS TYPE "B" (FOR ROUND & SIDE TAPERED INLETS, PIPE SIZES 15" TO 78", ALL SKEWS, 2:1 AND 4:1 SLOPES)1976
10/25/1982
GENERAL DIMENSION QUANTITIES ROUND PIPE CONCRETE ENDWALLS TYPE "B" (PIPE SIZES 15" TO 78", ALL SKEWS,       2:1 AND 4:1 SLOPES)1976
 
GEN.DIMENSIONS AND QUANTITIES SIDE, TAPER INLETS CONCRETE ENDWALLS TYPE "B" (PIPE SIZES 15" TO 78", ALL SKEWS 2:1 AND 4:1 SLOPES)1976
 
BILL OF STEEL (SHEET 1 OF 4) CONCRETE ENDWALLS TYPE "B" (FOR CONCRETE ROUND AND SIDE TAPERED INLETS, PIPE SIZE 15" TO 78", ALL SKEW, 2:1 SLOPE)1976
 
BILL OF STEEL (SHEET 2 OF 4) CONCRETE ENDWALLS TYPE "B" (FOR CONCRETE ROUND AND SIDE TAPERED INLETS, PIPE SIZE 15" TO 78", ALL SKEWS 4:1 SLOPE)1976
 
BILL OF STEEL (SHEET 3 OF 4) CONCRETE ENDWALLS TYPE "B" (FOR STEEL ROUND AND SIDE TAPERED INLETS, PIPE SIZE 15" TO 78", ALL SKEWS 2:1 SLOPE)1976
 
BILL OF STEEL (SHEET 4 OF 4) CONCRETE ENDWALLS TYPE "B" (FOR STEEL ROUND AND SIDE TAPERED INLETS, PIPE SIZE 15"TO 78", ALL SKEWS 4:1 SLOPE)1976

*NOTE: THE PROTECTED ENDWALLS MAY NOT BE USED INSIDE THE CLEAR ZONE UNLESS SHIELDED BY GUARDRAIL OR OTHER SAFETY DEVICE.


 


Questions or comments regarding use of these files should be directed to:

For questions or assistance contact

Ali Hangul, PE

Matthew Chandler, PE

Roadway Design Division

Office of Standards and Policy

Roadway Design Division

Office of Standards and Policy

505 Deaderick Street

1300 James K. Polk Building

Nashville, TN  37243-1402

505 Deaderick Street

1300 James K. Polk Building

Nashville, TN  37243-1402

615-741-0840

615-253-8351