Skip to Content

Multimodal Transportation Resources Highway-Railroad Grade Crossing Program (Section 130)

James K. Polk Building, Suite 1800
505 Deaderick Street
Nashville, TN 37243
Phone: (615) 253-1043
Erik Andersen, Highway-Railroad Crossing Program Manager

Highway-Railroad Grade Crossing Program (Section 130)

Anytime a roadway crosses railroad tracks, there is a risk of a collision.  And in a collision with atrain, you are 20 times more likely to be killed than if you were in a collision with another car.  The objective of TDOT’s Highway-Railroad Crossing Program is to improve safety and reduce crash risk at Tennessee’s public highway-railroad grade crossings.  “Grade” crossings refers to those crossings at which the highway and railroad are at the same level, as opposed to “grade separated” crossings in which there is a bridge to allow one to pass over the other.

Tennessee’s Highway-Railroad Crossing Program, commonly referred to as the Section 130 Program, is a federal aid program authorized by United States Code Title 23, Section 130, and is administered through the state by the Federal Highway Administration (FHWA).  Typically, Section 130 funds are used to install warning devices, such as train-activated flashing lights, automatic gates, and warning bells.  These funds may also be used to provide various other safety improvements at existing crossings and to assist in the closure of unneeded crossings.

Tennessee typically receives about $4,600,000 in Section 130 funds annually.  The typical cost of a Section 130 Program safety improvement project is from $180,000 to $280,000.  Priority for the available funds is given to crossings with the greatest likelihood of a collision occurring.  This is determined using an FHWA accident prediction model, which takes into consideration many factors including:

  • Average daily traffic on the highway;
  • Number of train movements per day;
  • Maximum train speed; and
  • Crash history, if any.

The Highway-Railroad Crossing Program maintains a crossing inventory database, including information about warning devices and signage, for each public crossing in Tennessee.  The information is used to prioritize crossings for projects and to update the national crossing inventory database maintained by the Federal Railroad Administration (FRA).  For more information, please see the FRA National Grade Crossing Inventory.

For standards and procedures on construction of new crossings and conversion of private crossings to public crossings, please see TDOT’s Rule1680-09-01.  These standards and procedures are administered by TDOT’s Traffic Engineering Office.

Related websites:
FHWA Section 130 Program
FRA Office of Safety Analysis
Operation Lifesaver