SR 840 South - Williamson County
Project Location Map | Project Library | Major Project Partners | Community Center Information
State Route 840
In 1986, State Route 840 was initiated as part of the state’s Better Roads Program to provide economic growth by improving access to communities in Middle Tennessee. On the 78-mile route, 66 miles are open to traffic, with approximately 12 miles remaining in some phase of construction in Williamson County. The entire route is scheduled to be open to traffic by December 2012.
Construction
Projects
- From Pinewood Road (SR 46) to Leipers Creek Road:
Eubank Asphalt Paving & Sealing began work on this section in early 2010. This contract includes grading, bridge and retaining wall construction, paving, striping, signing and installation of guardrails.
- From Leipers Creek Road to Columbia Pike (SR 6):
The grading work and bridge construction on this project is complete. However, the project still needs to be paved, striped, signed and have guardrail installed. Lojac Enterprises will begin this work in early 2012.
State Route 840 status listed from the west (I-40, Dickson County) to east (I-40, Wilson County)
Complete/Open to Traffic
From I-40 in Dickson County to Highway 100 in Williamson County
Complete/Open to Traffic
From Highway 100 to Pinewood Road (SR 46) in Williamson County
Under Construction (Eubank Asphalt Paving)
From Pinewood Road (SR 46) to Leipers Creek Road in Williamson County
Under Construction (Bell & Associates)
From Leipers Creek Road to Columbia Pike (SR 6) in Williamson County
Complete/Open to traffic
From U.S. 31 in Williamson County to I-40 in Wilson County
